PT Cruiser Club Customizing Tip

"Adding a supercharger to the PT Cruiser"

Add-ons by PTCCmike

Michael J. Challis - PT Cruiser Club President and Founder
Chrysler Certified Professionals- Gold Level Technician.
Nationally Recognized Chrysler Top Tech Award Winner
ASE Certified - Master Auto Technician

Supercharger emblem — Purchased from www.teammiata.com

Click for larger picture

Boost Gauge

I put a boost gauge in the PT cruiser.
It is a VDO Gauge - part # 701-1711, with tubing kit 701-2109 I bought it at a NAPA auto parts store for about $50
It was a very tight fit. I removed the instrument bezel, then cut the hole with a 2" hole saw.
I also had to cut plastic inside the dash directly behind the gauge to make room to stuff it in there.
It says Turbo, but that is OK.

Note: Please refer to the owners manual/service manual for service information and safety precautions, this is not intended as substitute for the service manual/owners manual. This information is subject to revision or change. PTCC accepts no responsibility for any damage or injury.

Supercharger index page

Please Join the PT Cruiser Club, it provides a wealth of information about the PT Cruiser, constant amusement and warm friendships.

Copyright ©  2001 - PT Cruiser Club. All rights reserved.